Cisco Ccna 200-301 Practical Lab Guide With Packet Tracer Pdf Link
ip dns server ip host www.ccnalab.com 192.168.1.100 Topology : WLC – Switch – AP – Laptop (wireless)
Cisco CCNA 200-301 Practical Lab Guide Hands-On Labs with Packet Tracer
ip dhcp pool LAN_POOL network 192.168.1.0 255.255.255.0 default-router 192.168.1.1 dns-server 8.8.8.8 (Packet Tracer only): ip dns server ip host www
access-list 1 deny host 192.168.1.10 access-list 1 permit any interface g0/0 ip access-group 1 out :
interface range f0/1-2 channel-group 1 mode active interface port-channel 1 switchport mode trunk Topology : PC-VLAN10 — SW1 (Trunk) — R1 (subinterfaces) — PC-VLAN20 ip dns server ip host www
vlan 10 name Sales vlan 20 name Engineering interface f0/1 switchport mode access switchport access vlan 10 interface f0/24 switchport mode trunk switchport trunk allowed vlan 10,20 : show vlan brief | show interfaces trunk Lab 3 – STP & EtherChannel Topology : SW1 – SW2 – SW3 (triangle with redundant links)
spanning-tree vlan 1 root primary show spanning-tree : ip dns server ip host www
:
network 10.1.1.0 0.0.0.3 area 0 network 192.168.2.0 0.0.0.255 area 1 : show ip ospf neighbor | show ip route ospf Lab 7 – IPv6 Addressing & Routing Configure IPv6 on interface :
