Lambert | Lx 24 Fi Instrukcia

| P-code | Function | Default | Adjust range | |--------|----------|---------|---------------| | P01 | Maximum CH power | 24 kW | 5–24 | | P02 | Pump post-circulation time | 3 min | 0–10 | | P03 | Antifreeze activation temp | 5°C | 3–10 | | P05 | DHW preheating (comfort) | 0 (off) | 0/1 | | P08 | Minimum CH power | 5.4 kW | 3–10 | | P10 | Fan speed offset | 0 | -5 to +5 |

Press and hold the Mode/Reset button for 3 seconds until the error disappears. If the error returns within 24 hours, call a technician. 10. Flue System Requirements The Lambert LX 24 FI is approved for concentric flue (60/100 mm) or twin pipe (80/80 mm) with adaptor. lambert lx 24 fi instrukcia

Introduction The Lambert LX 24 FI is a wall-hung, gas-fired condensing boiler designed for residential heating and domestic hot water (DHW) production. The "FI" designation typically indicates a forced flue (fan-assisted) model with a fully integrated electronic management system. This boiler is part of Lambert’s next-generation LX series, known for energy efficiency (ErP compliant), low NOx emissions, and compact design. | P-code | Function | Default | Adjust

A: Yes. The LX 24 FI works with volt-free (230V) or OpenTherm thermostats. Use terminals 3-4 for OpenTherm (if supported) or 1-2 for on/off. Flue System Requirements The Lambert LX 24 FI

A: Typically a dirty DHW plate heat exchanger or low flow rate. Clean the inlet filter first.