The screen is glued to the inside of the front housing. Apply gentle heat (hair dryer on low, ~50–60°C) around the display window. Use a thin spudger to lift the old screen. Do not bend the front frame – it contains the optical viewfinder alignment. 4. Installing New Screen Step 1 – Clean the mounting surface Remove all old adhesive from the front housing with isopropyl alcohol. Ensure no glass shards remain (risk of puncturing the new flex cable).
Unscrew 2 small cross-head screws holding the metal shield over the display ribbon connector. Leica Disto D510 Screen Replacement
Locate the ZIF (zero insertion force) connector for the display. Flip up the brown/black locking bar, then gently pull the flex cable straight out. The screen is glued to the inside of the front housing