Micrometer Screw — Gauge Worksheet With Solution

Zero error = +0.04 mm (excess). True thickness = Scale reading – Zero error = 5.72 – 0.04 = 5.68 mm If zero error were negative (-0.04), you would add.

Average = (6.25 + 6.27 + 6.26) ÷ 3 = 18.78 ÷ 3 = 6.26 mm Section C Answers 10. False – The thimble typically has 50 divisions , each = 0.01 mm. Some have 100 (0.001 mm resolution), but standard school ones use 50.

0.50 + (25 × 0.01) = 0.75 mm Explanation: Sleeve shows 0 + half-mm line = 0.50 Section B Solutions 6. Sleeve = 1.50 mm, Thimble = 0.42 mm Total = 1.92 mm micrometer screw gauge worksheet with solution

The ratchet prevents over-tightening and damage. (T / F)

Sleeve shows: 3 mm (half-mm line NOT visible) Thimble aligns: 47 divisions Reading = ______ mm Zero error = +0

A micrometer can measure the thickness of a human hair easily. (T / F) ✅ Solutions with Explanations Section A Solutions 1. 5.00 + (32 × 0.01) = 5.32 mm Explanation: No half mm, so sleeve = 5.00

3.00 + (47 × 0.01) = 3.47 mm (Note: Thimble 47 means 0.47 mm) False – The thimble typically has 50 divisions , each = 0

– Human hair is ~0.02–0.2 mm thick. A 0.01 mm resolution micrometer can measure it, though carefully. Quick Reference: Common Mistakes | Mistake | Correction | |---------|-------------| | Forgetting the half mm | Always check the short line above the main scale. | | Misreading thimble (e.g., 32 as 0.32) | That’s correct, but remember: 32 = 0.32 mm. | | Ignoring zero error | Always check and subtract/add before final answer. | | Parallax error | Read the thimble alignment straight-on, not at an angle. |

– The ratchet slips when the correct pressure is applied, preventing damage to the screw or object.

8.50 + (3 × 0.01) = 8.53 mm