Ctrlk

Nemo Norske Stemmer File

Det er fint at du vil ha en historie basert på "Nemo norske stemmer". Siden jeg ikke vet nøyaktig hvilken retning du ønsker, har jeg utviklet en liten, original fortelling som leker med ideen om både opphavet til stemmene i den norske dubben av Finding Nemo (Leif Arne Kjerremyr som Marvin? Her er en alternativ vri) og selve ordspillet "Nemo" (latin for "ingen").

Hun bestemte seg for ikke å gjenopplive ham. I stedet lagde hun jubileumsutgaven med en blank lydfil der Nemos replikker skulle ha vært. Hun kalte den "Stemmen som ingen hørte". nemo norske stemmer

Ella frøs. Hun trykket på opptak. Ingenting ble tatt opp. Stemmen kom bare direkte i øret hennes, som en gammel radiokanal fra en annen dimensjon. Det er fint at du vil ha en

I et lite opptakssstudio på Majorstuen satt lyddesigneren Ella timevis med en gammel lydfil merket "NEMO_NORSK_2003_TAK_4". Filen var korrupt. Halve replikkene var borte, erstattet av en merkelig, susende stillhet. Hun bestemte seg for ikke å gjenopplive ham

– Hvem er du? hvisket hun.

Natt etter natt satt hun alene i studioet. Hodetelefonene suset. Så, ved midnatt på tredje dagen, hørte hun noe svakt i støyen.

– Hjelp meg å finne hjem, sa stemmen. – Jeg er Nemo.

 footprint_model: # types: "point", "circular", "two_circles", "line", "polygon"
    type: "polygon" #"circular" 
    radius: 0.38 # for type "circular"
    #line_start: [-0.3, 0.0] # for type "line"
    #line_end: [0.3, 0.0] # for type "line"
    #front_offset: 0.2 # for type "two_circles"
    #front_radius: 0.2 # for type "two_circles"
    #rear_offset: 0.2 # for type "two_circles"
    #rear_radius: 0.2 # for type "two_circles"
    vertices: [ [0.26, 0.26], [0.26, -0.26], [-0.26, -0.26], [-0.26,0.26] ]   # for type "polygon"

  inflation_dist: 0.0
  dynamic_obstacle_inflation_dist: 0.05
  include_costmap_obstacles: True
  costmap_obstacles_behind_robot_dist: 0.1
  obstacle_poses_affected: 25 #30
  costmap_converter_plugin: ""
  costmap_converter_spin_thread: True
  costmap_converter_rate: 5

footprint: [ [0.26, 0.26], [0.26, -0.26], [-0.26, -0.26], [-0.26,0.26] ]
# robot_radius: 0.38 #0.38 
# footprint_padding: 0.05 
map_type: voxel
#track_unknown_space: true

obstacle_layer:
    origin_z: -0.1
    z_resolution: 1.8 #1.5 This must be higher than the z coordinate of the mounted lidar
    z_voxels: 1 
    obstacle_range: 10.0 #10.0
    raytrace_range: 15.0 #15.0
    observation_sources: laser_scan_sensor
    track_unknown_space: true
    lethal_cost_threshold: 100
    unknown_cost_value: 255 

    laser_scan_sensor: {data_type: LaserScan, topic: /scan, marking: true, clearing: true, min_obstacle_height: 0.00, max_obstacle_height: 3.00}
#point_cloud_sensor: {sensor_frame: lslidar_c16_frame, data_type: PointCloud2, topic: /lslidar_c16/lslidar_point_cloud, marking: true, clearing: true}
    
lowbstacle_layer:
    origin_z: -0.1
    z_resolution: 1.8
    z_voxels: 1
    obstacle_range: 3.5 #if beyond this threshold, then will not mark as obstacle
    raytrace_range: 5.0 #5.0 Lower this value to detect nearer obstacles with better accuracy
    observation_sources: obs_cloud mock_scan #butt_scan1 butt_scan2
    publish_voxel_map: true
    track_unknown_space: true
    lethal_cost_threshold: 100
    unknown_cost_value: 255

    obs_cloud:
        data_type: PointCloud2
        topic: /obstacles_cloud
        marking: true
        clearing: true
        min_obstacle_height: 0.01
        max_obstacle_height: 0.99
    mock_scan:
        data_type: LaserScan
        topic: /obstacles_scan
        marking: false
        clearing: true 
        min_obstacle_height: 0.00
        max_obstacle_height: 1.00
        inf_is_valid: true

inflation_layer:
    enabled: true
    cost_scaling_factor: 6.0 #added in by John
    inflation_radius: 0.39 #0.45 #Minimum value: 0.379
    
dynamic_obstacle_layer:
    enabled: false
    map_tolerance: 0.2
    footprint_radius: 0.5
    range: 2.0

  plugins:
    - {name: static_layer, type: "costmap_2d::StaticLayer"}
    - {name: obstacle_layer, type: "costmap_2d::VoxelLayer"}
    - {name: lowbstacle_layer, type: "costmap_2d::VoxelLayer"}
    - {name: dynamic_obstacle_layer, type: "dynamic_obstacle_layer::DynamicLayer"} # Uncomment to apply dynamic_obstacle_layer
    - {name: inflation_layer, type: "costmap_2d::InflationLayer"}

  plugins:
    - {name: obstacle_layer, type: "costmap_2d::VoxelLayer"}
    - {name: lowbstacle_layer, type: "costmap_2d::VoxelLayer"}
    - {name: inflation_layer, type: "costmap_2d::InflationLayer"}
    # - {name: range_sensor_layer, type: "range_sensor_layer::RangeSensorLayer"}

obstacle_layer:
    origin_z: -0.1
    z_resolution: 1.8 #1.5 This must be higher than the z coordinate of the mounted lidar
    z_voxels: 1 
    obstacle_range: 10.0 #10.0
    raytrace_range: 15.0 #15.0
    observation_sources: laser_scan_sensor
    track_unknown_space: true
    lethal_cost_threshold: 100
    unknown_cost_value: 255 

    laser_scan_sensor: {data_type: LaserScan, topic: /scan, marking: true, clearing: true, min_obstacle_height: 0.00, max_obstacle_height: 3.00}
    #point_cloud_sensor: {sensor_frame: lslidar_c16_frame, data_type: PointCloud2, topic: /lslidar_c16/lslidar_point_cloud, marking: true, clearing: true}

lowbstacle_layer:
    origin_z: -0.1
    z_resolution: 1.8
    z_voxels: 1
    obstacle_range: 3.5 #if beyond this threshold, then will not mark as obstacle
    raytrace_range: 5.0 #5.0 Lower this value to detect nearer obstacles with better accuracy
    observation_sources: obs_cloud mock_scan #butt_scan1 butt_scan2
    publish_voxel_map: true
    track_unknown_space: true
    lethal_cost_threshold: 100
    unknown_cost_value: 255

    obs_cloud:
        data_type: PointCloud2
        topic: /obstacles_cloud
        marking: true
        clearing: true
        min_obstacle_height: 0.01
        max_obstacle_height: 0.99
    mock_scan:
        data_type: LaserScan
        topic: /obstacles_scan
        marking: false
        clearing: true 
        min_obstacle_height: 0.00
        max_obstacle_height: 1.00
        inf_is_valid: true