Resetter Canon Ip1980 Link

Resetting the Canon iP1980 using Service Tool v1800 is effective for clearing the 5B00 error, but it is a temporary solution . For a "good report" in a maintenance context, always combine the software reset with physical waste ink pad maintenance to ensure long-term reliability.

Objective: To clear the "Waste Ink Absorber Full" error (typically indicated by blinking orange light 7 times or an error code 5B00) and return the printer to a functional state. resetter canon ip1980

| Symptom | Solution | | :--- | :--- | | Tool shows "Error 002" | Printer not in Service Mode. Repeat step 1 carefully. | | Tool shows "Error 005" | USB port not selected manually. Choose USB001/002, not Auto. | | Reset seems successful but error returns immediately | Waste pads are physically full. Clean pads or install external tank, then reset again. | | Lights flash green then orange 7 times after reset | EEPROM failure. Printer is beyond economical repair. | Resetting the Canon iP1980 using Service Tool v1800

The Canon iP1980 uses an internal counter to track the amount of ink flushed into its waste ink pads. Once this counter reaches a predetermined limit, the printer permanently locks itself to prevent overflow. Note: This reset does not physically clean or replace the pads; it only resets the counter. | Symptom | Solution | | :--- |