Tiga Device Camera Software -

1. Introduction Tiga Device refers to a family of embedded camera modules and industrial imaging devices commonly used in machine vision, medical imaging, robotics, and surveillance. The Tiga Device Camera Software is the firmware/driver stack and user-space toolkit that enables host systems (Linux, Windows, or RTOS) to capture, process, and stream video from Tiga imaging sensors.

dev.stop_stream() #include <tiga/tiga.h> int main() tiga::Camera cam(0); cam.set_control("ExposureTime", 1000); // 1 ms cam.set_control("Gain", 12.0f); cam.start(); tiga device camera software

while True: ret, frame = cap.read() if not ret: break cv2.imshow("Tiga Camera", frame) if cv2.waitKey(1) & 0xFF == ord('q'): break dev.stop_stream() #include &lt

tiga::FrameBuffer buffer(1920, 1080, tiga::Format::Mono8); for (int i = 0; i < 100; ++i) cam.grab(buffer); process_image(buffer.data(), buffer.size()); int main() tiga::Camera cam(0)

This guide covers software version 3.x (unified stack) and applies to Tiga USB3 Vision, GigE, and MIPI CSI-2 models. The Tiga software stack consists of four layers: