| Pin | Name | Description | | :--- | :--- | :--- | | 1 | VIN | Unregulated DC input (e.g., 24V) | | 2 | GND | Common ground (input and output) | | 3 | ON/OFF | Remote control (TTL high = on) | | 4 | NC | No connect | | 5 | TRIM | Output voltage adjust (use resistor divider) | | 6 | VOUT | Regulated DC output | | 7 | SENSE | Remote sense (connect to VOUT if unused) |
Need more help? Search for the exact alphanumeric string including any prefix/suffix (e.g., "UP0132P-123") or upload a clear photo of the component and its PCB to electronics forums like EEVblog or Reddit r/AskElectronics.
| Parameter | Typical Value | Notes | | :--- | :--- | :--- | | | 4.5V to 40V DC | Wide range for automotive/industrial | | Output Voltage | Fixed (e.g., 3.3V, 5V, 12V) or Adjustable | Often single output | | Output Current | 500mA to 3A | Depends on package (SIP vs SMD) | | Switching Frequency | 50 kHz to 300 kHz | Older modules are lower frequency | | Topology | Buck (Step-Down) or Buck-Boost | Rarely isolated | | Efficiency | 75% to 90% | Max at mid-load range | | Package | SIP-7, SIP-9, or TO-220-like | Vertical mount with 5-9 pins |
The UP0132P is a specific electronic component identifier. However, it is critical to note that this part number is not a standard JEDEC or common industry-wide code (like a 2N2222 or LM317). Through market research, the UP0132P most frequently refers to a DC-DC Converter Module (often a step-down/boost or isolated power supply) or, less commonly, a specialized RF transistor or thyristor from Japanese manufacturers (e.g., NEC or Mitsubishi).