Zte At Interface Driver File

TargetVendor=0x19d2 TargetProduct=0x1405 MessageContent="5553424312345678000000000000061e000000000000000000000000000000" Then trigger switch:

sudo apt install usb-modeswitch Create /etc/usb_modeswitch.d/19d2:1403 : zte at interface driver

sudo usb_modeswitch -c /etc/usb_modeswitch.d/19d2:1403 sudo modprobe cdc_acm sudo modprobe option sudo modprobe qcserial # for newer ZTE LTE modules Step 4: Verify AT Port After switching, check: zte at interface driver

ls /dev/ttyUSB* # or /dev/ttyACM* dmesg | grep -i zte Typical output: zte at interface driver

lsusb | grep 19d2 # Example: 19d2:1403 (storage mode) Install usb-modeswitch and add config:

ACTION=="add", SUBSYSTEM=="usb", ATTRidVendor=="19d2", ATTRidProduct=="1405", RUN+="/usr/sbin/usb_modeswitch -v 19d2 -p 1405 -M '5553424312345678000000000000061e000000000000000000000000000000'" Then:

usb 1-2: ZTE MF833U1 Modem (CDC ACM) → ttyACM0 (AT) usb 1-2: ZTE MF833U1 PCUI → ttyUSB1 Create /etc/udev/rules.d/99-zte-modem.rules :

H2I Group uses uses cookies and similar technologies as strictly necessary to make our site work. We and our partners would also like to set additional cookies to analyze your use of our site, to personalize and enhance your visit to our site and to show you more relevant content and advertising. For more information, please read our Privacy Statement.
Accept Cookies